How to Fix Common PS5 Controller Problems and Issues

0

The PS5 Dual Sense controller is one of the best features of the new console. Still, it can also have problems and issues affecting your gaming experience. In this article, we will show you how to fix some of the most common PS5 controller problems and issues. You can Aslo Enjoy The latest trends and innovations in mobile gaming and VR such as:

  • Controller drift
  • Battery issues
  • Charging issues
  • Connection issues

Controller drift

Controller drift is when your thumbsticks move on their own without you touching them. It can cause your character or camera to move in unwanted directions, which can be frustrating. Controller drift usually happens because of wear and tear on the thumbsticks, which are connected to sensors that detect movement. Over time, these sensors can get damaged or dirty and cause inaccurate readings.

How to Fix Common PS5 Controller Problems and Issues

image credit Macsources

There are many ways to fix controller drift, depending on the severity of the problem. Here are some steps you can try:

Clean the thumbsticks

Sometimes, dust or debris can get stuck under the thumbsticks and interfere with the sensors. To clean them, you will need a cotton swab, some rubbing alcohol, and a can of compressed air. First, turn off your controller and push the thumbsticks to the side. Then, use the cotton swab dipped in rubbing alcohol to wipe around the base of the thumbsticks gently. Make sure the alcohol is dry before proceeding. Next, use the can of compressed air to blow away any remaining dust or debris. Be careful not to tilt the can sideways or put it too close to the thumbsticks, which can cause moisture to enter the controller. Repeat this process for both thumbsticks.

Reset the controller

Resetting the controller can sometimes fix minor glitches or calibration issues that cause drift. You will need a small tool to reset your controller, such as a paper clip or a toothpick. First, turn off your PS5 console and disconnect your controller from any power source. Then, find the most minor reset button on the controller’s backside near the L2 button. Use your tool to press and hold the button for about 3 to 5 seconds. Then, connect your controller to your PS5 console using the USB cable that came with it, and press the PS button.

Update the controller firmware

Updating the controller firmware can sometimes fix bugs, improve performance, and reduce drift. To update your controller firmware, you must connect your controller to your PS5 console using the USB cable that came with it. Then, go to Settings > Accessories > Controllers > Software Update and follow the instructions on the screen.

If none of these methods work, you may need to replace your controller or contact PlayStation Support for further assistance.

Battery issues

Battery issues occur when your controller runs out of power quickly or does not hold a charge. This can happen because of several reasons, such as:

  • A faulty battery
  • A damaged USB cable
  • A defective USB port
  • A glitch in the Bluetooth connection
How to Fix Common PS5 Controller Problems and Issues

image credit Hexgaming

There are a few ways to fix battery issues, depending on the cause of the problem. Here are some steps you can try:

Replace the battery

If your battery is faulty or worn out, you may need to replace it with a new one. This is not an easy task, as you must open up your controller and remove some screws and wires. It would help if you also bought a compatible battery online or from a local store. If you are uncomfortable doing this yourself, you may want to seek professional help or buy a new controller instead.

Replace the USB cable

If your USB cable is damaged or broken, it may not be able to charge your controller properly. You can use a different USB cable that works with your PS5 console and see if that solves the problem.

Replace the USB port

If your USB port is defective or loose, it may not be able to deliver enough power to your controller. You can use a different USB port on your PS5 console or another device to see if that solves the problem.

Restart your PS5 console and controller

Restarting your PS5 console and controller can sometimes fix glitches or errors affecting the battery life or charging process. To do this, turn off your PS5 console and disconnect your controller from any power source. Then, wait for a few minutes and turn on your PS5 console again. Connect your controller using the USB cable that came with it and press the PS button.

If you need help with these methods, you may need to contact PlayStation Support for further assistance.

Charging issues

Charging issues are when your controller does not charge at all or charges very slowly. This can happen because of several reasons, such as:

  • A low-power USB port
  • A low-quality USB cable
  • A dirty or damaged USB port or cable
  • A wrong date setting on your PS5 console

There are a few ways to fix charging issues, depending on the cause of the problem. Here are some steps you can try:

Use a high-power USB port

Some USB ports may need to be able to provide enough power to charge your controller, especially if they are connected to other devices or extensions. You can try using a USB port that is directly connected to your PS5 console or to a wall outlet and see if that solves the problem.

Use a high-quality USB cable

Some USB cables may not be able to transfer enough power to charge your controller, especially if they are cheap or old. You can using the USB cable that came with your PS5 console or another high-quality USB cable and see if that solves the problem.

Clean or replace the USB port or cable

Sometimes, dirt or damage can interfere with the charging process and prevent your controller from getting enough power. You can try cleaning the USB port and cable with a cotton swab and some rubbing alcohol or replacing them with new ones if they are visibly damaged.

Set the correct date on your PS5 console

Sometimes, setting the wrong date on your PS5 console can cause a bug that prevents your controller from charging. You can try setting the correct date manually and see if that solves the problem. To do this, go to Settings > Network and turn off the internet or WiFi connection of your console. Then, go to Settings > System > Date and Time and set the date to the day after via manual settings. Connect your PS5 controller to your console using the USB cable that came with it, and restart your PS5 console. Update your controller firmware and keep it plugged in.

If none of these methods work, you may need to contact PlayStation Support for further assistance.

Connection issues

Connection issues are when your controller does not connect to your PS5 console wirelessly or disconnects randomly. This can happen because of several reasons, such as:

  • A low-battery
  • A wireless interference
  • A pairing error
  • A software glitch
How to Fix Common PS5 Controller Problems and Issues

image credit Fossbytes

There are many ways to fix connection issues, depending on the cause of the problem. Here are some steps you can try:

Charge your controller

If your controller battery is low, it may not be able to connect or stay connected to your PS5 console wirelessly. You can try charging your controller using the USB cable that came with it and see if that solves the problem.

Reduce wireless interference

If there are too many wireless devices or signals near your PS5 console or controller, they may interfere with the Bluetooth connection and cause connection issues. You can try moving your PS5 console or controller away from other wireless devices or sources, such as routers, phones, microwaves, etc., and see if that solves the problem.

Pair your controller again

If there is a pairing error between your PS5 console and controller, they may not be able to communicate properly. You can try pairing your controller again and see if that solves the problem. To do this, turn on your PS5 console and connect your controller using the USB cable that came with it. Press and hold the PS button and the Create button on your controller for about 3 seconds until the light bar flashes blue. Then, disconnect the USB cable and press the PS button again.

Update your PS5 console and controller software

Sometimes, updating your PS5 console and controller software can fix bugs, improve compatibility, and reduce connection issues. To do this, go to Settings > System > System Software > System Software Update and Settings and follow the instructions on the screen.

If none of these methods work, you may need to contact PlayStation Support for further assistance.

Conclusion

We hope this article has helped you fix some of the common PS5 controller problems and issues you may encounter. If you have any questions or feedback, please let us know in the comments below.

Share.